The Coop Almanac
For U.S. backyard flocks

Raising Backyard Chickens: Gear for a First Flock

What a first backyard flock needs at each stage: hatching, brooder, feed and water, coop doors and winter. Based on extension guidance and makers' specs.

Feed a day—
Feed a month—
Eggs a week, at most—

Add your feed price →
Right now in the backyard—
Hens in a tidy backyard next to a simple feeder and waterer

Raising backyard chickens calls for different gear at each stage: an incubator if you hatch your own eggs, a brooder with a heat source for chicks, then a feeder, a waterer and a secure coop door for grown hens, and a plan for frozen water in winter. This page walks through those stages in order and points to the guide for each one. Everything here comes from extension services, makers’ published specs and one store price — we don’t test products.

How many chickens do I need?

University of New Hampshire Extension says to “consider your space, egg needs, and town ordinances” when you decide how many birds to keep. On eggs, its guide says ten hens should lay about nine eggs a day once they all get started, and that a 10-hen flock eases off to six to seven eggs a day after 13 months of production.

Breed matters a lot. University of Illinois Extension gives 250–270 eggs a year per hen. UNH’s breed table runs from 100–160 a year for Standard Cochins up to 250–300 for White Leghorns. As a rough estimate of ours (yearly figures divided by 52): if your household uses two dozen eggs a week, that is about 5 hens at 250–270 eggs a year, or about 8–13 Cochins.

Space: UNH says mature laying hens should have at least three square feet of floor space per bird. For local limits on flock size or roosters, check your city or county ordinance and HOA rules.

What does it cost to raise chickens?

The cost that never stops is feed. Mississippi State University Extension says an average laying hen eats about 1/4 to 1/3 lb of feed a day, depending on weather, size and production. At the low end of that range, 6 hens eat about 46 lb a month. With a 50 lb bag of Purina Layena 16% Layer Pellets at $24.49 at NRS (as of November 12, 2026), that comes to about $268 a year in feed. That is feed only — not bedding, chicks, equipment or electricity. Put in your own numbers with the feed and egg calculator.

Stage 1: Hatching (optional)

If you start from fertile eggs, you need an incubator. Mississippi State Extension recommends 100°F in a forced-air (fan) incubator and 102°F in a still-air one; makers preset their own (the Nurture Right 360 manual gives 99.5°F), and the manual comes first. University of Maryland Extension lists 21 days for chicken eggs and says to stop turning them at day 18.

All incubation guides: Incubation.

Stage 2: The brooder

Chicks need a warm, dry space before they can live in the coop. Penn State Extension says to supply 95°F at chick level under the heat source for the first week, then lower the heat by 5°F a week until the normal daily temperature (62–65°F) is reached. The main choice is the heat source: a heat lamp or a heat plate.

All brooder guides: Brooder.

Stage 3: Feed, water and the coop door

Grown hens need a feeder that keeps feed dry and off the floor, and a waterer that stays clean. A coop door that opens and closes on a timer or light sensor is optional; makers sell battery, solar and mains-powered models.

All guides: Feeders & waterers · Coop gear.

Stage 4: Winter

Water is the first winter problem. UNH Extension’s advice for cold weather is to “use a water heater or empty it at night and refill in the morning.” On coop heat, UNH Extension writes that “in most circumstances” it advises against adding supplemental heat to a coop, because of the fire risk with combustible bedding and hens that knock things over, though it says some cases, such as some smaller breeds, may call for it.

If a bird seems sick, injured or cold-stressed, talk to a poultry veterinarian or your county extension office.

Fire safety

Heat lamps, heat plates, heated waterers and coop heaters are electrical equipment near dry bedding. Follow the maker’s instructions for mounting, cords and spacing. Penn State Extension says heat lamps should, as a rule, be at least 20 inches from any flammable material and hung by a chain or cable.

Bottom line

Buy gear one stage at a time: incubator only if you hatch, a brooder and heat source before chicks arrive, then a feeder, a waterer and (if you want one) an automatic door, and a winter water plan before the first freeze. Start with the tools to size your flock’s feed and your hatch dates.

Feeders & Waterers

All feeders & waterers →