Heat lamp for chicks or a brooder heat plate? Published wattage, chick capacity, room-temperature limits, prices and fire-safety rules side by side.
- A red heat lamp bulb is 250 W; the heat plates in our table list 12 W to 40 W (one panel, 200 W).
- Penn State Extension: keep heat lamps at least 20 inches from any flammable material, hung by chain or cable.
- Brinsea says its EcoGlow plates are indoor-only and the room should not drop below 50°F.
In this guide

A heat lamp for chicks hangs above the brooder and is adjusted by raising or lowering it; a heat plate is a low, warm panel the chicks walk under. The published numbers differ most in power and in fire-safety rules: a red heat lamp bulb is 250 W and must be kept at least 20 inches from anything flammable (Penn State Extension), while the heat plates below list 12–40 W (one heat panel, the Chickcozy, lists 200 W) and come with their makers’ own limits, such as Brinsea’s 50°F minimum room temperature.
We don’t test heaters. This page compares published specs, prices and what extension services and fire officials say.
How each one works
Heat lamp. A bulb in a reflector hangs over one end of the brooder. University of New Hampshire (UNH) Extension describes a heat lamp keeping the area at 90–95°F in the first week and lowering the temperature 5 degrees each week by raising the lamp. It says to measure 2.5 inches above the litter, directly below the hood. Penn State Extension, listing artificial heat sources, says: “Heat lamps are more expensive to use but are the most popular.”
Heat plate. A flat heated panel stands on adjustable legs; chicks go under it to warm up and step out to cool off. Brinsea says its EcoGlow height adjusts “for different chick sizes” and that one end can be set lower than the other. Hatching Time says the Warmzy’s legs “customize clearance as chicks grow.” RentACoop lists 25 height settings from 1 to 9 inches.
Side-by-side specs and prices
Prices as of November 10, 2026. Wattage and chick counts are the makers’ published figures.
| Model | Type | Chicks (maker) | Power | Price |
|---|---|---|---|---|
| Brinsea EcoGlow Safety 600 | heat plate, 12 V transformer | up to 20 | 12 W | $89.99 (list $99.99) at My Pet Chicken; $79.99 (list $99.99) at brinsea.com |
| Brinsea EcoGlow Safety 1200 | heat plate, 12 V transformer | up to 35 | 18 W | $124.99 (list $139.99) at My Pet Chicken; $111.99 (list $139.99) at brinsea.com |
| Hatching Time Warmzy 12” x 16” (HP-3040) | heat plate, 110 V | up to 30 | 30 W | $55.99 (list $69.99) |
| K&H Thermo-Poultry Brooder, Small | heat plate | up to 15 | 25 W | $59.98 (list $82.99) |
| RentACoop 12x12” Heating Plate | heat plate (maker: “no thermostat required”) | up to 20 | 22 W | $59.95 |
| Chickcozy Smart Coop Heater & Chick Brooder | heat panel with built-in sensor, 110/120 V | not stated | 200 W | $79.99 (list $89.99) |
| Red infrared heat lamp bulb (Bradley Caldwell, at My Pet Chicken) | bulb, needs a fixture | not stated | 250 W | $9.99; brooder lamp with clamp $19.99 |
Other sizes, same stores: Warmzy 10x10 $47.99, 10x12 $51.99, 16x22 (40 W, up to 55 chicks) $63.99 (sale prices); K&H Large (40 W, up to 30 chicks) $79.98 (list $110.99); RentACoop 10x10 (15 W, up to 15 chicks) $49.95.
Where two stores sell the same Brinsea plate, both prices are shown; on November 10 brinsea.com was lower for both EcoGlow models.
Power, in plain numbers. Running nonstop for 24 hours, a 250 W bulb draws 6 kWh; an 18 W EcoGlow 1200 draws about 0.43 kWh; a 30 W Warmzy about 0.72 kWh (our arithmetic from the published wattage — check your own electric rate for the cost). RentACoop makes the same comparison on its page: 22 W “compared to the 250 watts used by a heat lamp.”
Limits each maker or source states
- Brinsea EcoGlow 600 and 1200: “for indoor use only and the room temperature should not drop below 50°F (10°C).” Runs at 12 V from the supplied transformer, which Brinsea calls “a much safer option than mains voltage.”
- Hatching Time Warmzy: built-in thermal fuses and flame-retardant insulating materials, per the maker. We didn’t find a room-temperature limit on the product page; its user manual is linked from that page.
- K&H Thermo-Poultry Brooder: K&H says it is MET listed. We didn’t find a room-temperature limit on the product page.
- RentACoop: the maker says “no thermostat required”; we didn’t find a room-temperature limit on the product page.
- Chickcozy: the maker says to keep chicks within 70–95°F and that the heater is for 110/120 V supplies only. Chickcozy also states it is “Certified by UL & FCC.”
- Red heat lamp bulb: My Pet Chicken, which sells it, says surface temperatures “exceed 400 degrees” and writes that it “can not recommend them for chicks or coops.”
If your brooder is in a garage or shed that gets colder than a plate maker’s limit, that plate’s manual — not this page — decides whether it can be used there.
How to tell if the heat is right (either type)
Penn State Extension and UNH Extension describe the same cues: comfortable chicks spread out evenly; cold chicks huddle under the heat; chicks that are too warm move as far from the heat as they can. Penn State says to measure temperature at chick level, directly under the heat source, and suggests a high/low thermometer. The target by age is on chick temperature by week.
If chicks look chilled or unwell despite the right reading, talk to a poultry veterinarian or your county extension office.
Which fits which situation (by published specs)
- Most chicks per unit: Hatching Time lists the Warmzy 16” x 22” (40 W, $63.99 sale) for up to 55 chicks — the largest stated capacity of the plates on this page; next is the Brinsea EcoGlow 1200 (up to 35), then the Warmzy 12” x 16” and K&H Large (up to 30 each).
- Lowest wattage: the Brinsea EcoGlow 600 (12 W).
- Lowest price: the red bulb ($9.99) plus a clamp fixture ($19.99), $29.98 together at My Pet Chicken (our sum); among plates, the Warmzy 10x10 ($47.99 sale), then RentACoop’s 10x10 ($49.95).
- Cold room: check the maker’s minimum room temperature before buying; Brinsea’s is 50°F.
For the rest of the brooder (space, bedding, water), see how to set up a chick brooder.
Fire safety
Read and follow your heater’s own manual first. Then:
- Distance. Penn State Extension: “heat lamps should be at least 20 inches from any flammable material.” Bedding counts — UNH Extension warns not to let the lamp get close enough to catch the bedding on fire.
- Hanging. Penn State: secure all heat sources so they cannot move or slip toward flammable materials; use a chain or cable. UNH Extension: don’t hang a lamp by its cord; use a “Hard Glass” bulb where possible.
- Clamps and cords. NFPA (National Fire Protection Association) tips, as published by the Clark County (WA) Fire Marshal’s office: relying on the spring clamp alone is not adequate to keep a lamp from falling; choose equipment made for agricultural or commercial use; don’t use extension cords in coops; brush dust and cobwebs from fixtures and outlets regularly.
- Heat plates and panels. Use them only as their makers’ manuals describe — on the legs or mounts supplied, at the heights and in the rooms the maker specifies.
Bottom line
On published numbers, the 12–40 W heat plates draw a fraction of a 250 W lamp’s power (the 200 W Chickcozy panel is the exception) and have no bulb that My Pet Chicken says runs above 400 degrees, but each comes with its maker’s limits — Brinsea’s, for example, is indoor use above 50°F. A heat lamp costs less to buy and is the approach Penn State calls “the most popular,” but it must hang by chain or cable at least 20 inches from anything flammable. Whichever you choose, set it to the weekly temperatures and follow the maker’s manual.
Sources (14)
- Penn State Extension — Brooding of Domestic Fowl (checked 2026-11-11)
- University of New Hampshire Extension — Brooding and Caring for Chicks (checked 2026-11-11)
- Clark County (WA) Fire Marshal — Safety tips to prevent a chicken coop fire, May 6, 2021 (checked 2026-11-11)
- Brinsea — EcoGlow Safety 600 product page (checked 2026-11-11)
- Brinsea — EcoGlow Safety 1200 product page (checked 2026-11-11)
- Hatching Time — Warmzy Heating Plate 12 x 16 (maker and store, checked 2026-11-11)
- K&H Pet Products — Thermo-Poultry Brooder (maker and store, checked 2026-11-11)
- RentACoop — 12x12 Adjustable Heating Plate (maker and store, checked 2026-11-11)
- Chickcozy — Smart Chicken Coop Heater & Chick Brooder (maker and store, checked 2026-11-11)
- My Pet Chicken — Infrared Heat Lamp Bulb, Red, 250 W (store, checked 2026-11-11)
- My Pet Chicken — EcoGlow Safety 600 (store, price as of 2026-11-10)
- My Pet Chicken — EcoGlow Safety 1200 (store, price as of 2026-11-10)
- My Pet Chicken — Brooder Lamp w/clamp (store, price as of 2026-11-10)
- Hatching Time — Warmzy Heating Plate 16 x 22 (maker and store, checked 2026-11-12)